MXL AC360Z-Hardware Issues in Zoom App

The MXL AC-360-Z microphones purchased between August 17 and September 26, 2018 have defects found on the chip on board. This bad chip is not recognized in the Zoom room for Mac and may not work properly.

If your device is not affected

  1. The MXL AC360Z is displayed as a USB audio codec (number) on the Zoom room controller interface.
  2. Your MXL AC360Z is displayed as MXL AC360Z (0) in the controller interface of the Zoom room, and the MXL AC360Z is connected to the PC zoom room (Windows).

If your device is functionally affected

If the MXL AC360Z is connected to the Zoom Room for Mac (MacOS), your device is functionally affected. Contact MXL for replacement unit.

At this time, it is not possible to use a combination of USB audio codec (number) and MXL AC360Z (0) with the same zoom room settings on both Mac and Windows. MXL AC404Z and MXL AC360Z can be mixed with both descriptors as USB audio codecs (numbers).

To open an alternative claim

Please contact the MXL internal agent associated with this issue:

  • Steve Curto at +1 (800) 800-6608 x 1124 or
  • MXL is currently reprogramming the on-board chip and will begin replacing units on November 5, 2018, and will complete it by November 30, 2018.

If you get a new MXL (MXL-AC360v2 )

Download the latest Zoom Rooms software for Mac or PC .

Thank you for your trust and acclaim for the MXL and Zoom brands. In addition, we apologize for any inconvenience caused by this situation.